User's Manual

Parameter Description
Advertise Enabled Capabilities
IE
This value is used to determine if the RRM Enabled Capabilities IE
should be advertised in the beacon frames. A value of "Enabled" allows
the RRM Enabled Capabilities IE to be present in the beacon frames
when 802.11K capability is enabled. A value of "Disabled" prevents the
advertisement of the RRM Enabled Capabilities IE in the beacon frames
when 802.11K capability is enabled.
Advertise Country IE This value is used to determine if the Country IE should be advertised in
the beacon frames. A value of "Enabled" allows the Country IE to be
present in the beacon frames when 802.11K capability is enabled. A
value of "Disabled" prevents the advertisement of the Country IE in the
beacon frames when 802.11K capability is enabled.
Advertise Power Constraint IE This value is used to determine if the Power Constraint IE should be
advertised in the beacon frames. A value of "Enabled" allows the Power
Constraint IE to be present in the beacon frames when 802.11K
capability is enabled. A value of "Disabled" prevents the advertisement
of the Power Constraint IE in the beacon frames when 802.11K
capability is enabled.
Advertise TPC Report IE This value is used to determine if the TPC Report IE should be
advertised in the beacon frames. A value of "Enabled" allows the TPC
Report IE to be present in the beacon frames when 802.11K capability is
enabled. A value of "Disabled" prevents the advertisement of the TPC
Report IE in the beacon frames when 802.11K capability is enabled.
Advertise QBSS Load IE This value is used to determine if the QBSS Load IE should be
advertised in the beacon frames. A value of "Enabled" allows the QBSS
Load IE to be present in the beacon frames when 802.11K capability is
enabled. A value of "Disabled" prevents the advertisement of the QBSS
Load IE in the beacon frames when 802.11K capability is enabled. The
default value is "Enabled".
Advertise BSS AAC IE This value is used to determine if the BSS Available Admission Capacity
IE should be advertised in the beacon frames. A value of "Enabled"
allows the BSS Available Admission Capacity IE to be present in the
beacon frames when 802.11K capability is enabled. A value of
"Disabled" prevents the advertisement of the BSS Available Admission
Capacity IE in the beacon frames when 802.11K capability is enabled.
Advertise Quiet IE This value is used to determine if the Quiet IE should be advertised in
the beacon frames. A value of "Enabled" allows the Quiet IE to be
present in the beacon frames when 802.11K capability is enabled. A
value of "Disabled" prevents the advertisement of the Quiet IE in the
beacon frames when 802.11K capability is enabled.
Table 74: RRM IE Parameters
4. Click Apply Changes to save your settings.
In the CLI
To use the CLI to configure radio resource management information elements in the RRM IEprofile, access the
CLI in config mode and issue the following commands:
wlan rrm-ie-profile <profile>
bss-aac-ie
clone
country-ie
enabled-capabilities-ie
no...
pwr-constraint-ie
Dell Networking W-Series ArubaOS 6.4.x | User Guide Virtual APs | 407