User's Manual

In the WebUI
1. Navigate to the Configuration > Wireless > AP Configurationwindow. Select either the AP Group or AP
Specific tab.
a. If you selected the AP Group tab, click the AP group name for which you want to configure the 802.11R
profile.
b. If you selected the AP Specific tab, click the AP for which you want to configure the 802.11R profile.
2. In the Profiles list, expand the Wireless LANmenu, then expand the Virtual APmenu.
3. Select the Virtual AP profile for which you want to configure the 802.11r settings and expand SSID Profile.
4. Select the SSID profile on which you want to configure the 802.11r settings and select 802.11R Profile.
a. To edit an existing 802.11r profile, click the 802.11R Profiledrop-down list in the Profile
Detailswindow pane and select the 802.11r profile you want to edit.
or
b. To create a new 802.11r Profile, click the 802.11R Profile drop-down list and select New. Enter a new
802.11r profile name in the field to the right of the drop-down list.
You cannot use spaces in profile names.
5. Configure the following 802.11r radio settings.
a. Select the Advertise 802.11r Capability option to allow Virtual APs using this profile to advertise
802.11r capability.
b. Enter the mobility domain ID value (1-65535) in the 802.11r Mobility Domain ID field. The default
value is 1.
c. Enter the R1 Key timeout value in seconds (60-86400) for decrypt-tunnel or bridge mode in the 802.11r
R1 Key Duration field. The default value is 3600.
6. ClickApply to save your settings.
In the CLI
Create an 802.11r profile using the following command:
(host) (config) #wlan dot11r-profile voice-enterprise
Enable Fast BSS Transition using the following command:
(host) (802.11R Profile "voice-enterprise") #dot11r
Configure a mobility domain ID that uniquely identifies a mobility domain using the following command:
(host) (802.11R Profile "voice-enterprise") #mob-domain-id <1-65535>
The default value is 1.
Configure the r1 key timeout value in seconds for decrypt-tunnel or bridge mode using the following
command:
(host) (802.11R Profile "voice-enterprise") #key_duration <60-86400>
The default value is 3600 seconds.
Apply the 802.11r profile to an SSID profile using the following command:
(host) (config) #wlan ssid-profile voice dot11r-profile voice-enterprise
You can advertise the 802.11r capability on the Virtual AP profile by applying the SSID profile. Use the
following command to apply the SSID profile to the Virtual AP profile:
(host) (config) #wlan virtual-ap voice-AP ssid-profile voice
Dell Networking W-Series ArubaOS 6.4.x | User Guide Virtual APs | 413