User's Manual
Parameter Description
Advertise Location
Information
When this option is enabled, APs broadcast their location within a IE carried in
Beacon frames and Probe Response frames. The AP’s latitude, longitude and
altitude can be configured on the Configuration > Wireless> AP Installation
page of the controller WebUI, or using the provision-ap command in the controller
command-line interface.
Advertise AP Name If this parameter enabled, APs will broadcast the AP name configured by the ap-
name command. This option is disabled by default.
Enforce User VLAN for
Open Stations
Select this option to restrict data traffic from open stations to the user's assigned
VLAN. This option is disabled by default.
In the CLI
(host)(config) #wlan ssid-profile <profile>
WLAN Authentication
The AAA profile configures the authentication for a WLAN. The AAA profile defines the type of authentication
(802.1x in this example), the authentication server group, and the default user role for authenticated users.
It is recommended that you assign a unique name to each virtual AP, SSID, and AAA profile that you modify.
Configuring an AAAProfile in the WebUI
1. Navigate to Configuration > Security > Authentication > Profiles, the select the AAA Profiles tab.
2. Scroll down to the bottom of the AAA Profiles Summary pane, then click Add. An entry blank appears.
3. Enter the AAA profile name, then click Add.
4. In the profiles list, and select the AAA profile you just created.
5. Configure the AAA profile parameters (see Table 79),
6. Click Apply.
Dell Networking W-Series ArubaOS 6.4.x | User Guide Virtual APs | 421