User's Manual

556 | Secure Enterprise Mesh Dell Networking W-Series ArubaOS 6.4.x| User Guide
1. Navigate to the Configuration > Advanced Services> All Profiles window.
2. Expand the Mesh menu, then select Mesh radio profile. A list of mesh radio profiles appears in the
Profile Details window pane.
3. Click Delete by the name of the profile you want to delete.
The following command deletes a radio profile via the command-line interface.
(host)(config)no ap mesh-radio-profile <profile-name>
Creating and Editing Mesh High-Throughput SSID Profiles
The mesh high-throughput SSID profile defines settings unique to 802.11n-capable, high-throughput APs. If
none of the APs in your mesh deployment are 802.11n-capable APs, you do not need to configure a high-
throughput SSID profile. If you modify a currently provisioned and running high-throughput SSID profile, your
changes take effect immediately. You do not reboot the controller or the AP.
Managing Mesh High-Throughput SSID Profiles in the WebUI
Use the following procedures to manage your high-throughput SSID profiles using the WebUI.
Creating a Profile
To create a high-throughput SSID profile:
1. Navigate to the Configuration > Wireless > AP Configuration window. Select either the AP Group or AP
Specific tab.
l If you selected AP Group, click Edit by the AP group for which you want to create the new high-
throughput SSID profile.
l If you selected AP Specific, click Edit by the AP for which you want to create the new high-throughput
SSID profile.
2. In the Profiles list, expand the Mesh menu, then select Mesh High-throughput SSID profile.
3. In the Profile Details window pane, click the Mesh High-throughput SSID profile drop-down list and
select NEW.
4. Enter a name for the new profile.
5. Configure the mesh high-throughput SSID parameters described in Table 104. The Mesh High-Throughput
SSID Profile configuration settings are divided into two tabs, Basic and Advanced. The Basic tab displays
only those configuration settings that often need to be adjusted to suit a specific network. The Advanced
tab shows all configuration settings, including settings that do not need frequent adjustment or should be
kept at their default values. If you change a setting on one tab then click and display the other tab without
saving your configuration, that setting reverts to its previous value.
6. Click Apply. The profile name appears in the Mesh High-throughput SSID Profile list with your configured
settings.