User's Manual

590 | RSTP Dell Networking W-Series ArubaOS 6.4.x| User Guide
Feature Default Value/Range
Port Cost The RSTP interface path cost.
Range: 1–65536
Default: Based on Interface type:
Fast Ethernet 10Mbs:100
Fast Ethernet 100Mbs:19
1 Gigabit Ethernet:4
10 Gigabit Ethernet: 2
Priority Change the interface’s RSTP priority
Range: 0–255
Default: 128
Port Fast Change from blocking to forwarding
Default : Disabled
Point-to-Point Set the interface as a point-to-point link
Default : Enabled
Table 112: RSTP Default Values
In the CLI
Change the default configurations via the command line.
(host) (config-if)#spanning-tree ?
cost Change an interface's spanning tree path cost
point-to-point Set interface as point-to-point link
port-priority Change an interface's spanning tree priority
portfast Allow a change from blocking to forwarding
Monitoring RSTP
Statistical information for point-to-point, role, BPDU etc. can be viewed from the WebUI (see Figure 64).