User's Manual

The following command displays the mobility multicast-group table that floods the multicast RA traffic to the
roaming clients:
(host) # show datapath mobility mcast-table
Datapath Mobility Multicast Table
---------------------------------
GRE Tunnel HomeVlan McastGroup Members
---------- -------- ---------- -------
0x10009 501 0 1
The following commands displays the statistics of the datapath mobility:
(host) #show datapath mobility stats
Datapath Mobility Stats
Mcast group entry alloc errors : 0
Frames flooded over MMG (@HA) : 0
Frames subjected to MMG (@FA) : 0
Frames sent to roamed clients : 0
HA Discovery failure to notify NACK : 0
HA Discovery invalid DCT : 0
HA Discovery DCT allocation failed : 0
HA Discovery Probes sent : 0
HA Discovery NULL bridge entry in DCT : 0
HA Discovery failed to start : 0
HA Discovery successfully started : 0
HAT insert failure : 0
HAT insert success : 0
HAT delete failure : 0
HAT delete success : 0
The following command displays the mobility multicast VLAN table information:
(host) #show ip mobile multicast-vlan-table
Mobility Multicast Vlan Table
-----------------------------
Client MAC Home vlan Current vlan
---------- --------- ------------
40:2C:F4:36:16:07 501 501
The outputs of the following commands are enhanced to support IPv6 L3 mobility:
l show ip mobile host
l show ip mobile trace
l show ip mobile remote
l show ip mobile binding
l show ip mobile visitor
l show ip mobile trail
l show ip mobile packet-trace
l clear ip mobile trail <IPv6_addr>
l show ip mobile traffic
l show ip mobile global
l show ip mobile hat
l show ip mobile domain
l ip mobile domain <name> hat <home-agent> description <dscr>
Example Configuration
The following figure provides information on how a client moves from one controller to another, when you
enable IPv6 L3 mobility feature:
Dell Networking W-Series ArubaOS 6.4.x | User Guide IP Mobility | 611