User's Manual
Provisioning RAP Using Zero Touch Provisioning
You provision the RAP using provisioning wizard:
1. Navigate to the RAP configuration URL : http:/rapconsole.dell-pcw.com.
2. Enter the IP address or hostname of the controller.
3. Click the Show Advanced Settings link, shown in Figure 84.
Figure 84 Show Advanced Settings
4. In the Advanced Settings wizard, you can select one of the following:
a. Static IP—Select this tab to provision your RAP using a static IP address.
b. PPPoE—Select this tab to provision your RAP on a PPPoE connection.
c. USB—Select this tab to provision your RAP using 3G/EVDO USB modem.
Provisioning the RAP using a Static IP Address
Select the Static IP tab and enter the required details. See Table 125 for information on parameters.
Figure 85 Provision RAP using Static IP
Item Description
IP Address Enter the static IP address that you want to configure for your remote access point.
Netmask Enter the network mask.
Gateway Enter the default gateway IP address of your network.
Table 125: Provision using Static IP
Dell Networking W-Series ArubaOS 6.4.x | User Guide Remote Access Points | 671