User's Manual

Configuration Option Description
VIA IPSec V2 Crypto Map List of all IPSec V2 that the VIA client uses to connect to the controller.
VIA IPSec Crypto Map List of IPSec Crypto Map that the VIA client uses to connect to the controller.
These IPSec Crypto Maps are configured in CLI using the crypto-local
ipsec-map <ipsec-map-name> command.
VIA Client Network Mask The network mask that has to be set on the client after the VPN connection is
established.
Default: 255.255.255.255
Enable Supplicant If enabled, VIA starts in bSec mode using L2 suite-b cryptography. This option is
disabled by default.
Enable FIPS Module Enable the VIA(Federal Information Processing Standard) FIPS module so VIA
checks for FIPS compliance during startup. This option is disabled by default.
Auto-Launch Supplicant Select this option to automatically connect to a configured WLAN network.
Lockdown all Settings If enabled, all user options on the VIA client are disabled.
Domain Suffix in
VIAAuthentication
Enables a domain suffix on VIA Authentication, so client credentials are sent as
domainname\username instead of just username..
Enable Controllers Load
Balance
Enable this option to allow the VIA client to failover to the next available selected
randomly from the list as configured in the VIA Servers option. If disabled, VIA
will failover to the next in the sequence of ordered list of VIA Servers.
Enable Domain Pre-
connect
Enable this option to allow users with lost or expired passwords to establish a
VIA connection to corporate network. This option authenticates the user’s device
and establishes a VIA connection that allows users to reset credentials and con-
tinue with corporate access.
VIA Banner Message
Reappearance Timeout
(minutes)
The maximum time (minutes) allowed before the VIA login banner reappears.
Default: 1440 min
VIA Client Network Mask VIA client network mask, in dotted decimal format.
Validate Server
Certificate
Enable or disable VIA from validating the server certificate presented by the
controller.
Default: Enabled
VIA max session timeout The maximum time (minutes) allowed before the VIA session is disconnected.
Default: 1440 min
VIA Logon Script Specify the name of the logon script that must be executed after VIA establishes
a secure connection. The logon script must reside in the client computer.
VIA Logoff Script Specify the name of the log-off script that must be executed after the VIA
connection is disconnected. The logoff script must reside in the client computer.
Dell Networking W-Series ArubaOS 6.4.x | User Guide Virtual Intranet Access | 689