User's Manual

Figure 97 VIA - Configure VIA Client WLAN Profile
The VIA client WLAN profile are similar to the authentication settings used to set up a wireless network in
Microsoft Windows. The following table shows the Microsoft Windows equivalent settings:
Option Description
EAP-PEAP options Select the following options, if the EAP type is PEAP (Protected EAP):
l validate-server-certificate: Select this option to validate server certificates.
l enable-fast-reconnect: Select this option to allow fast reconnect.
l enable-quarantine-checks: Select this option to perform quarantine checks.
l disconnect-if-no-cryptobinding-tlv: Select this option to disconnect if server does
not present cryptobinding TLV.
l dont-allow-user-authorization: Select this to disable prompts to user for
authorizing new servers or trusted certification authorities.
EAP Type Select an EAP type used by client to connect to wireless network.
Default: EAP-PEAP
EAP-Certificate
Options
If you select EAP type as certificate, you can select one of the following options:
l mschapv2-use-windows-credentials
l use-smartcard
l simple-certificate-selection
l use-different-name
l validate-server-certificate
Inner EAP Type Select the inner EAP type.
Default: EAP-MSCHAPv2
Table 131: Configure VIA client WLAN profile
Dell Networking W-Series ArubaOS 6.4.x | User Guide Virtual Intranet Access | 693