User's Manual

836 | 802.11u Hotspots Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
Roaming Consortium OI Entry 2 Roaming consortium OI assigned to one of the service provider’s
top three roaming partners. This additional OI will only be sent to
a client if the Additional Roaming Consortium OI's parameter is
set to 2 or higher.
NOTE: The service provider’s own roaming consortium OI is
configured using theANQP Roaming Consortium profile.
Roaming Consortium Len Entry 3 Length of the OI. The value of the Roaming Consortium Len Entry -
3 parameter is based upon the number of octets of the Roaming
Consortium OI Entry 3 field.
l 0: Zero Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
Roaming Consortium OI Entry 3 Roaming consortium OI assigned to one of the service provider’s
top three roaming partners. This additional OI will only be sent to
a client if the Additional Roaming Consortium OI's parameter is
set to 3.
NOTE: The service provider’s own roaming consortium OI is
configured using theANQP Roaming Consortium profile.
Additional Roaming Consortium
OI's (displayed in Advertisement
Profile)
Number of additional roaming consortium Organization
Identifiers (OIs) advertised by the AP. This feature supports up to
three additional OIs, which are defined using the Roaming
Consortium Len Entry 1, Roaming Consortium Len Entry 2 and
Roaming Consortium Len Entry 3 parameters
HESSID This optional parameter devices an AP’s homogenous ESS
identifier (HESSSID), which is that device’s MAC address in colon-
separated hexadecimal format.
Venue Group Type
Specify one of the following venue groups to be advertised in the
IEs from APs associated with this hotspot profile. The default
setting is unspecified.
l assembly
l business
l educational
l factory-or-industrial
l institutional
l mercantile
l outdoor
l reserved
l residential
l storage
l unspecified
l Utility-Misc
l Vehicular
NOTE: This parameter only defines the venue group advertised in
the IEs from hotspot APs.
Venue Type
Specify a venue type to be advertised in the IEs from APs
associated with this hotspot profile. The complete list of
supported venue types is described in Configuring Hotspot 2.0
Profiles on page 834.
This parameter only defines the venue type advertised in the IEs
from hotspot APs.