User's Manual

838 | 802.11u Hotspots Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
GAS comeback delay in
milliseconds
At the end of the GAS comeback delay interval, the client may
attempt to retrieve the query response using a Comeback
Request Action frame. The supported range is 100-2000
milliseconds, and the default value is 500 milliseconds.
RADIUS Chargeable User Identity
(RFC4372)
Include this parameter to enable the Chargeable-User-Identity
RADIUS attribute defined by RFC 4372. Home networks can use
this attribute to identify a user for the roaming transactions that
take place outside of that home network.
RADIUS Location Data (RFC5580) Include this parameter to enable the Location Data RADIUS attrib-
ute defined by RFC 5580. Enabling this parameter allows the
RADIUS server to use user location data.
In the CLI
To configure a hotspot 2.0 profile from the controller CLI, access the CLI in config mode and issue the following
commands:
wlan hotspot h2-profile <profile-name>
access-network-type emergency-services|personal-device|private|private-guest|public-
chargeable|public-free|test|wildcard
addtl-roam-cons-ois <addtl-roam-cons-ois>
advertisement-profile <profile-name>
advertisement-protocol anqp|eas|mih-cmd-event|mih-info|rsvd
asra
clone <profile-name>
comeback-mode
gas-comeback-delay
grp-frame-block
hessid <id>
hotspot-enable
internet
no ..
p2p-cross-connect
p2p-dev-mgmt
pame-bi
query-response-length-limit <query-response-length-limit>
radius_cui
radius_loc_data
roam-cons-len-1 0|3|5
roam-cons-len-2 0|3|5
roam-cons-len-3 0|3|5
roam-cons-oi-1 <roam-cons-oi-1>
roam-cons-oi-2 <roam-cons-oi-1>
roam-cons-oi-3 <roam-cons-oi-1>
time-advt-cap no-std-ext-timesrc|timestamp-offset-utc |reserved
time-error <milliseconds>
time-zone <time-zone>
venue-group <venue-group>
venue-type <venue-type>