User's Manual

846 | 802.11u Hotspots Dell Networking W-Series ArubaOS 6.4.x| User Guide
5. Configure the following parameters as desired, then click Apply.
Parameter Description
NAI Realm name
Name of the NAI realm. The realm name is often the domain name of the
service provider.
NAI Realm Encoding Issue this command if the NAI realm name is a UTF-8 formatted character
string that is not formatted in accordance with IETF RFC 4282.
NAI Realm EAP Method Select one of the options below to identify the EAP authentication method
supported by the hotspot realm.
l crypto-card: Crypto card authentication
l eap-aka: EAP for Universal Mobile Telecommunications System
(UMTS) Authentication and Key Agreement
l eap-sim: EAP for GSM Subscriber Identity Modules
l eap-tls: EAP-Transport Layer Security
l eap-ttls: EAP-Tunneled Transport Layer Security
l generic-token-card: EAP Generic Token Card (EAP-GTC)
l identity: EAP Identity type
l notification: The hotspot realm uses EAP Notification messages for
authentication.
l one-time-password: Authentication with a single-use password
l peap: Protected Extensible Authentication Protocol
l peap-mschapv2: Protected Extensible Authentication Protocol with
Microsoft Challenge Handshake Authentication Protocol version 2
NAI Realm Authentication
Param ID 1
Use the NAI Realm Authentication Param ID 1 parameter to send the
one of the following authentication methods for the primary NAI realm ID.
l credential-type: The specified authentication ID uses credential
authentication.
l expanded-eap: The specified authentication ID uses the expanded EAP
authentication method.
l expanded-inner-eap: The specified authentication ID uses the
expanded inner EAP authentication method.
l inner-auth-eap: The specified authentication ID uses inner EAP
authentication type.
l non-eap-inner-auth: The specified authentication ID uses non-EAP
inner authentication type.
NAI Realm Authentication
Param Value 1
Use the NAI Realm Authentication Param Value 1 parameter select
an authentication value for the authentication method specified by the NAI
Realm Authentication Param ID 1 parameter.
l cred-cert: Credential - Certificate
l cred-hw-token: Credential - Hardware Token
l cred-nfc: Credential - NFC
l cred-none: Credential - None
l cred-rsvd: Credential - Reserved
l cred-sim: Credential - SIM
l cred-soft-token: Credential - Soft Token
l cred-user-pass: Credential - Username/password
l cred-usim: Credential - USIM
l cred-vendor-spec: Credential - Vendor-specific
l eap-crypto-card: EAP Method - Crypto-card
l eap-generic-token-card: EAP Method - Generic-Token-Card
l eap-identity: EAP Method - Identity
l eap-method-aka: EAP Method - AKA
l eap-method-sim: EAP Method - SIM - GSM Subscriber Iden
Table 180: ANQPNAIRealm Profile Parameters