User's Manual

a. Navigate to the Configuration > Network > Port page and select the upstream port.
b. Under the VLAN Firewall Policy drop-down menu, select the ACL.
c. Click Apply .
Figure 191 Apply ACL to Port
4. Configure dynamic multicast optimization for video traffic on a virtual AP profile.
Under the Profiles column, expand Wireless LAN > Virtual AP Profile and select the profile name. This
example uses the default profile. In the Profile Details section, select the Dynamic Multicast
Optimization (DMO) option and enter the threshold value.
Figure 192 Enabling Dynamic Multicast Optimization for Video and Set Threshold
5. Configure multicast rate optimization for the video traffic.
a. Navigate to the Configuration > Advanced Services > All Profiles page.
b. Under the Profiles column, expand Wireless LAN > SSID Profile and select the profile name.
c. Click the Advanced tab and select the BC/MC Rate Optimization checkbox.
d. Select an option from Video Multicast Rate Optimization drop-down menu
e. Click Apply.
Configuring the Video Multicast Rate Optimization parameter overrides the configuration of BC/MC Rate
Optimization parameter for VI-tagged multicast traffic. Multicast traffic that is not VI-tagged behaves the same with
BC/MC as before. If multicast rate is not set, all traffic behaves the same.
Figure 193 Enable Multicast Rate Optimization
6. Configure ARM scanning for video traffic.
Under the Profiles column, expand RF Management > Adaptive Radio Management (ARM) Profile
and select the profile name. This example uses the default profile. Select the Video Aware Scan option and
click Apply.
Dell Networking W-Series ArubaOS 6.4.x | User Guide Voice and Video | 886