User's Manual

917 | Voice and Video Dell Networking W-Series ArubaOS 6.4.x| User Guide
Figure 204 Firewall Policies Tab
3. Click Add to create a new policy.
4. Enter a name for the policy in the Policy Name field and choose Session in the Policy Type drop down
menu.
5. Select IPv4 in the IP Version drop down menu and click Add.
6. In the Service column, choose service and Select svc-sips (tcp-5061) from the Service drop-down
menu.
7. Select the Classify Media check box.
There will be a performance impact if you choose any in the Service column and enable the Classify Media flag for
the deep packet inspection.
Figure 205 Enabling Classify Media
8. Click Apply.
Enabling WPA Fast Handover
In the 802.1x Authentication profile, the WPA fast handover feature allows certain WPA clients to use a pre-
authorized PMK, significantly reducing handover interruption. Check with the manufacturer of your handset to
see if this feature is supported. This feature is disabled by default.
This feature supports WPA clients, while opportunistic key caching (also configured in the 802.1x Authentication
profile) supports WPA2 clients.
In the WebUI
1. Navigate to the Configuration > AP Configuration page. Select either AP Group or AP Specific.
l If you select AP Group, click Edit for the AP group name for which you want to enable WPA fast
handover.
l If you select AP Specific, select the name of the AP for which you want to enable WPA fast handover.
2. Under Profiles, select Wireless LAN, then Virtual AP. In the Virtual AP list, select the appropriate virtual
AP instance.