User's Manual

Using the CLI
[no] airgroup active-domain <string>
Sample Configuration
(host) (config) #airgroup active-domain campus1
(host) (config) #airgroup active-domain campus2
Viewing an AirGroup active-domains
The following procedure displays a list of AirGroup active-domains configured:
Using the WebUI
1. Navigate to Configuration > Advanced Services > AirGroup.
2. Select the AirGroup Settings tab. The Active-Domain and Status column displays a list of AirGroup
active-domains under the AirGroup Domains section.
Using the CLI
show airgroup active-domains
Viewing AirGroup VLAN Table
The following procedure displays the disallowed AirGroup VLANs.
Using the WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup.
2. Select the AirGroup Settings tab. The list of disallowed AirGroup VLANs are displayed under the VLAN
Table section.
Using the CLI
For the CLI command, see Viewing An AirGroup Disallowed VLAN on page 959
Viewing AirGroup Multi-Controller Table
All controllers communicate with each other based on the multi-controller table in an AirGroup cluster. This
table is a combination of controllers specified in each domain, as part of active-domains.
The following command displays the IP address of all the controllers participating in an AirGroup multi-
controller environment:
Using the CLI
show airgroup multi-controller-table
Controller Dashboard Monitoring
The Dashboard > Usage page of the WebUI has an additional AirGroup section, which displays all the
AirGroup services available and number of servers offering the service. It is aggregated by the total number of
AirGroup servers sorted by the services they advertise.
Dell Networking W-Series ArubaOS 6.4.x | User Guide AirGroup | 962