User's Manual
969 | AirGroup Dell Networking W-Series ArubaOS 6.4.x| User Guide
3. Enter the IP address and click Add.
4. Select the IP address to enter the shared secret key in the Key text box.
5. Retype the shared secret key in the Retype text box.
Using the CLI
Use the following commands to configure an RFC 3576 server using the CLI:
aaa rfc-3576-server <server_ip>
key <string>
Sample Configuration
(host) (config) #aaa rfc-3576-server 10.100.8.32
(host) (RFC 3576 Server "10.100.8.32") #key employee123
Assigning CPPM and RFC 3576 Servers to AirGroup
Use the following procedures to assign CPPM and RFC 3576 servers to AirGroup.
An AirGroup RFC 3576 server cannot use the same port as an authentication module RFC 3576 server. To avoid
conflicts, use a non-standard port for the AirGroup RFC 3576 server.
Using the WebUI
Use the following procedure to configure the AirGroup AAA profile by using the controller WebUI:
1. Navigate to Configuration > Advanced Services > All Profiles.
2. Expand the Other Profiles menu and select AirGroup AAA Profile.
3. In the Configure dead time for a down Server text box in the Profile Details window, enter a
maximum period in minutes, so that a client that does not send user traffic for the given period is
considered idle.
4. Enter the UDP port number in the Configure UDP port to receive RFC 3576 server requests field. If
your network uses an RFC 3576 server for authentication, select a different port for the AirGroup 3576
server. The default in ClearPass Guest is 5999.
In this release of ArubaOS, the user-defined UDP port number for RFC3576 server is automatically permitted by the
firewall. The administrator does not have to explicitly define a firewall policy to permit this port.
5. Identify the AirGroup CPPM server group. In the Profiles list, select the Server Group under the AirGroup
AAA Profile menu.
6. In the Profile Details window, click the Server Group drop-down list to select the desired CPPM server
group.
7. Click Apply.
8. Identify the RFC 3576 server. In the Profiles list, select RFC 3576 Server under the AirGroup AAA Profile
menu.
9. Enter the IP address of the RFC 3576 server in the Add a profile text box.
10.Click Add and Apply.
Using the CLI
Execute the following commands to configure the AirGroup AAA profile using the CLI:
airgroup cppm-server aaa
rfc-3576-server <ip address>
rfc-3576_udp_port <port number>
server-dead-time <time>