User's Manual

server-group <server group name>
If your network uses an RFC 3576 server for authentication, select a different port for the AirGroup 3576 server. The
default port in ClearPass Guest is 5999.
Sample Configuration
(host) (config) # airgroup cppm-server aaa
(host) (Airgroup AAA profile) #rfc-3576-server 10.15.16.25
(host) (Airgroup AAA profile) #rfc3576_udp_port 21334
(host) (Airgroup AAA profile) #server-dead-time 10
(host) (Airgroup AAA profile) #server-group employee
Viewing the CPPM Server Configuration
Using the WebUI
To view the CPPM server configuration by using the controller WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup.
2. Under the AirGroup Settings tab, the AirGroup CPPM server aaa section displays the CPPM Server
configuration.;
Using the CLI
Use the following CLI command to view data for the ClearPass Policy Manager servers:
(host) #show airgroup cppm-server aaa
Config-cppm-server-aaa
----------------------
Parameter Value
--------- -----
Server Group RADIUS_4
RFC 3576 server Test1
Configure dead time for a down Server 10
Configure UDP port to receive RFC 3576 server requests N/A
The output of this command includes the following information:
Column Description
Parameter
Displays the AAA parameters for AirGroup.
Value
Displays the value entered for each AAA parameter.
Table 216: show airgroup cppm-server aaa
Verifying CPPM Device Registration
Use the following command to display information for devices registered in ClearPass Policy Manager.
(host) #show airgroup cppm entries
For more information, see Dell Networking W-Series ArubaOS 6.4 Command-Line Interface Reference Guide.
Dell Networking W-Series ArubaOS 6.4.x | User Guide AirGroup | 970