User's Manual

999 | External Services Interface Dell Networking W-Series ArubaOS 6.4.x| User Guide
1. Navigate to the Configuration > Advanced Services > External Services page.
2. Click Add in the Server Groups section.
(To change an existing group, click Edit.)
3. Provide the following details:
a. Enter a Group Name.
b. In the drop-down list, select a health check profile.
4. Click Done when you are finished.
5. Click Apply to apply the configuration changes.
In the CLI
Use these CLI commands to configure an ESI server group, identify its associated ping health-check method,
and associate a server with this group:
esigroupname
pingprofile_name
serverserver_identity
For example:
esigroupfortinet
pingdefault
serverforti_1
Redirection Policies and User Role
The following sections describe how to configure the redirection policies and user role using the WebUI and
CLI.
In the WebUI
To configure user roles to redirect the required traffic to the server(s), navigate to the Configuration > Access
Control > User Roles view.
1. To add a new role, click Add.
To change an existing role, click Edit for the firewall policy to be changed. The WebUI displays the User
Roles tab on top.
2. Role Name. Enter the name for the role.
3. To add a policy for the new role, click Add in the Firewall Policies section. The WebUI expands the Firewall
Policies section.
Choose from existing configured policies, create a new policy based on existing policies, or create a new
policy.
a. If you elect to create a new policy, click on the radio button for Create New Policy and then click
Create. The WebUI displays the Policies tab.
b. In the Policies tab:
Policy Name. Provide the policy name and select the IPv4 Session policy type from the drop-down list.
The WebUI expands the Policies tab.
c. In the drop-down lists, choose parameters such as source, destination, service in the same way as other
firewall policy rules. For certain choices, the WebUI expands and adds drop-down lists.
d. In the Action drop-down menu, select the redirect to ESI group option.
e. In the Action drop-down menu, select the appropriate ESI group.
f. Select the traffic direction. Forward refers to the direction of traffic from the (untrusted) client or user
to the (trusted) server (such as the HTTP server or email server).