Configuration manual

Dell PowerConnect W-AirWave 7.4 | Configuration Guide Configuration Reference | 101
3. Select Add or Save. The added or edited profile appears on the Mobility Switch page, and on the details page.
Profiles > Mobility Switch > Ethernet Link
Use the Ethernet Link profile to configure autonegotiation, duplex, speed, and flow control for the port. Creating
an Ethernet Link profile does not apply the configuration to any interface or interface group.
Perform these steps to configure a Mobility Switch > Ethernet Link profile:
1. Select Profiles > Mobility Switch > Ethernet Link in the Navigation pane. The details page summarizes the
current profiles of this type.
2. Select the Add button to create a new Ethernet Link profile, or select the pencil icon next to an existing
profile to edit. Complete the settings as described in Table 45:
Other Settings
Last-member-query-interval (1-
25 sec)
1 Specify the IGMP query interval in response to host leave message.
Enable Fast Leave No Enable or disables fast leave. You can enable this setting to improve bandwidth
management.
Enable Igmp Snooping Proxy No Enable or disable the IGMP Snooping proxy.
Last-member-query-count (1-5) 2 Specify the number of IGMP queries in response to host leave message.
Startup-query-count (1-10) 2 Specify the number of queries to be sent at startup.
Query-response-interval (1-25
sec)
10 Specify the maximum query response time.
Query-interval (1-18000 sec) 125 Specify the periodic interval at which queries are sent.
Startup-query-interval (1-18000
sec)
31 Specify the interval at which startup queries should be sent.
Enable Igmp Snooping Yes Enable or disable IGMP snooping.
Robustness-variable (1-7) 2 Specify the expected IGMP packet loss on a congested network.
Table 45 Profiles > Mobility Switch > Ethernet Link Profile Settings
Field Default Description
General Settings
Folder Top Set the folder with which the profile is associated. The drop-down menu displays all folders
available for association with the profile.
Name Blank Enter the name of the profile.
Other Settings
Autonegotiation Disabled Enables auto-negotiation of port speed.
Table 44 Profiles > Mobility Switch > IGMP Snooping Profile Settings (Continued)
Field Default Description