Configuration manual

Dell PowerConnect W-AirWave 7.4 | Configuration Guide Configuration Reference | 103
3. Select Add or Save. The added or edited profile appears on the Mobility Switch page, and on the details page.
Profiles > Mobility Switch > VLAN
This profile creates a VLAN with the specified configuration parameters. To enable role-based access for wired
clients connected to an untrusted VLAN and/or port on the switch, you must specify the wired AAA profile you
would like to apply to that VLAN. If you do not specify a per-VLAN AAA profile, traffic from clients connected to
an untrusted wired port or VLAN will use the global AAA profile, if configured.
Perform these steps to configure a Mobility Switch > VLAN profile:
1. Select Profiles > Mobility Switch > VLAN in the Navigation pane. The details page summarizes the current
profiles of this type.
2. Select the Add button to create a new VLAN profile, or select the pencil icon next to an existing profile to
edit. Complete the settings as described in Table 47:
Enable Broadcast Traffic
Rate Limit
Yes Enables storm control for broadcast.
Enable Multicast Traffic Rate
Limit
No Enables storm control for multicast.
Enable Unicast Rate Limit Yes Enables storm control for unicast.
Switchport Mode Access Specify whether the port is an access port connected to an end device or a trunk
port for uplink connectivity.
 access—Configures the port to be an access port.
 trunk—Configures the port to be a trunk port.
NOTE: Trunk mode and UnTrusted Port mode cannot be configured simultaneously.
Trunk Mode Allowed VLANs 1-4094 Identifies the VLAN IDs for which the trunk carries the traffic. Enter a list or range
of vlan tags and pools (e.g. "pool1,pool2,1,5,20-40"), or "all" or "none".
NOTE: Trunk mode and UnTrusted Port mode cannot be configured simultaneously.
Table 47 Profiles > Mobility Switch > VLAN Profile Settings
Field Default Description
General Settings
Folder Top Set the folder with which the profile is associated. The drop-down menu
displays all folders available for association with the profile.
Name Blank Enter the name of the profile.
Referenced Profiles
VLAN AAA profile None Assign an AAA profile to a VLAN to enable role-based access for wired
clients connected to an untrusted VLAN or port on the Mobility Access
Switch. This parameter applies to wired clients only.
Note that this profile will only take effect if the VLAN and/or the port on the
switch is untrusted. If both the port and the VLAN are trusted, no AAA profile
is assigned.
Table 46 Profiles > Mobility Switch > Port Switching Profile Settings (Continued)
Field Default Description