Configuration manual

Dell PowerConnect W-AirWave 7.4 | Configuration Guide Configuration Reference | 119
3. Select Add or Save. The added or edited profile appears on the Profiles > RF > Event Thresholds page.
Bandwidth Rate
High Watermark
0 Sets a high percentage watermark for bandwidth rate. When exceeded, this threshold
triggers a high-watermark-exceeded alert. Defining 0% disables this function.
Bandwidth Rate
Low Watermark
0 Sets a low percentage watermark for bandwidth rate. When exceeded, this threshold triggers
a low-watermark-exceeded alert. Defining 0% disables this function.
Frame Error Rate
High Watermark
50 Sets a high percentage watermark for frame error rates. When frame error rates exceed this
threshold, this setting triggers a high-watermark-exceeded alert. Defining 0% disables this
function.
Frame Error Rate
Low Watermark
10 Sets a low percentage watermark for frame error rates. When frame error rates exceed this
threshold, this setting triggers a low-watermark-exceeded alert. Defining 0% disables this
function.
Frame
Fragmentation Rate
High Watermark
0 Sets a high percentage watermark for frame fragmentation rates. When frame fragmentation
rates exceed this threshold, this setting triggers a high-watermark-exceeded alert. Defining
0% disables this function.
Frame
Fragmentation Rate
Low Watermark
0 Sets a low percentage watermark for frame fragmentation rates. When frame fragmentation
rates exceed this threshold, this setting triggers a low-watermark-exceeded alert. Defining
0% disables this function.
Frame Low Speed
Rate High
Watermark
0 Sets a high percentage watermark for low speed rates. When the percentage of received and
transmitted frames at low speed (less that 5.5Mbps for 802.11b and less than 24 Mbps for
802.11a) exceeds the configured high watermark, the system generates an alert. Defining 0%
disables this function.
Frame Low Speed
Rate Low
Watermark
0 Sets a low percentage watermark for low speed rates. When the percentage of received and
transmitted frames at low speed (less that 5.5Mbps for 802.11b and less than 24 Mbps for
802.11a) exceeds the configured Low Watermark, the system generates an alert. Defining 0%
disables this function.
Frame Non Unicast
Rate High
Watermark
0 Sets a high percentage watermark for non-Unicast frame rate. When the percentage of non-
Unicast frames exceeds the configured high watermark, the system generates an alert.
Defining 0% disables this function.
Frame Non Unicast
Rate Low
Watermark
0 Sets a low percentage watermark for non-Unicast frame rate. When the percentage of non-
Unicast frames exceeds the configured low watermark, the system generates an alert.
Defining 0% disables this function.
Frame Receive
Error Rate High
Watermark
50 Sets a high percentage watermark for frame-receive errors. When the percentage of errors
in received frames exceeds the configured high watermark, the system generates an alert.
Defining 0% disables this function.
Frame Receive
Error Rate Low
Watermark
10 Sets a low percentage watermark for frame-receive errors. When the percentage of errors in
received frames exceeds the configured low watermark, the system generates an alert.
Defining 0% disables this function.
Frame Retry Rate
High Watermark
50 Sets a high percentage watermark for frame retry levels. When the percentage of frame
retries exceeds the configured high watermark, the system generates an alert. Defining 0%
disables this function.
Frame Retry Rate
Low Watermark
10 Sets a low percentage watermark for frame retry levels. When the percentage of frame
retries exceeds the configured low watermark, the system generates an alert. Defining 0%
disables this function.
Table 56 Profiles > RF > Event Thresholds Profile Settings (Continued)
Field Default Description