User guide

14 AirWave 7.5.6 | Release Notes
DE11422 Fixed an issue that prevented users from using non-ASCII characters (for example, Chinese characters)
in the “Notes” and “Down Status Message” fields on the APs/Devices > Manage page. Inputting non-
ASCII characters no longer results in an error message.
DE11447 Support has been added for automatic static IP assignment for AirMesh devices on a per-group basis.
An interface on an AirMesh AP that is specified as ‘management’ and that is using DHCP will be
assigned a static IP.
DE11464 On the APs/Devices > Monitor page for AirMesh devices, radios with a channel width of either 40plus
or 40minus now display as 40MHz.
DE11482 Fixed an issue in VisualRF in which a change to the transmit power of a planned AP was not reflected
when viewing the heatmap overlay. Note that this issue only occurred when the Overlay Style for
Heatmap was set to Vector.
DE11496 After creating two walls in VisualRF, users can now drag one wall and connect it to the other. In prior
versions, attempting to drag a wall sometimes resulted in the wall remaining attached to the mouse
even after clicking on the mouse.
DE11498 Scrolling while the mouse is outside of a VisualRF background no longer results in an image zoom.
DE11540 The way that information displays on the System > Configuration Change Jobs page has been
improved. Instead of displaying the entire message with a horizontal scroll bar, messages that include
more than 75 characters are now truncated, and the user can click on the tooltip to view the entire
description.
DE11553 On the APs/Devices > Monitoring page, fixed an issue that caused CSV exports to return blank
information for switch members and WiFi tag lists.
DE11593 Fixed a timeout issue that caused ConfigVerifier to display a “Too many errors...” message in
management_status_message while auditing controllers on an AirWave server.
DE11609 When creating AOS WLANs using the WLAN wizard, AMP will only associate the WLAN with the default
Aruba AP Group if the current user has visibility into that group. Users who do not have the appropriate
privileges must now explicitly assign a WLAN to an AP Group. (Note that this behavior only applies to
Global Config mode.)
DE11627 LAN IP configuration is now supported for AirMesh APs. In addition, the AirMesh interface netmask is
now configured in IP format rather than with a mask length.
DE11658 “Uninitialized value” errors no longer display in the Web Server log (/var/log/httpd/error_log file).
DE11685 Only ASCII characters can be entered as SSH/Telnet credentials.
DE11729 A link to the VisualRF diagnostics report file is now hidden on System > Status page for the master
controller, the failover server, and AMPs with Display VisualRF specified as No.
DE11767 For Aruba controllers, enum values that are unsupported (e.g. usb-type ‘ether-lte’ on v6.1.3.0) are no
longer pushed. In addition, the audit page indicates that the value will not be pushed to the controller by
including a ‘<not supported>’ tag next to the desired value. These values that are not pushed previously
displayed as <unset>.
DE11813 Fixed an issue in which the Failover AMP did not take over after a watched AMP database stopped
responding. Now, when an authentication is attempted while the database is busy, a “503 (Service
Temporarily Unavailable)” message will display. In addition, the Failover AMP will retry logging in to the
Watched AMP as long as the database is busy and until the missed polls threshold is met. After this
value is met, a failover will be initiated.
Table 7 Resolved Issues in AirWave 7.5.0 (Continued)
ID Description