User guide

AirWave 7.5.6 | Release Notes 17
Table 10 below lists known issues in AirWave 7.5.4:
Table 11 below lists known issues for AirWave 7.5.2:
Table 12 below lists the known issues for AirWave 7.5.0:
DE12811 An issue exists in which the Asynch Logger fails, and AMP stops monitoring devices for approximately
one hour. The circumstances under which this behavior occurs is currently being investigate.
Table 10 Known Issues in AirWave 7.5.4
ID Description
DE12492 A configuration push inconsistency exists. After updating the RADIUS shared secret for a group and
then putting the controllers in that group into Manages mode, it is possible that the config will not be
pushed to all of those controllers.
DE12503 When upgrading to 7.5.x from a version prior to 7.5, existing devices may show up as “Discovered” after
the upgrade.
DE12534 In VisualRF, when an AP acts as both an AP for one radio and a sensor for the other radio, the device
will only show up as a sensor. It does not display as an AP.
DE12619 When monitoring a controller, the Modify Devices feature does not work if you attempt to modify
devices associated with the controller. Note that this behavior only exists in Internet Explorer.
Table 11 Known Issues in AirWave 7.5.2
ID Description
DE12092 A Service Type of “arp” is an available option in AirWave for ArubaConfig, but this setting is not
supported on the controller.
DE12288 Clicking on the Help link in AirWave may not open to the correct location in the User Guide PDF file. If
you use IE or Firefox, then your browser must be set up to open Adobe PDF files within the browser. If
you use Google Chrome, then you must use the Adobe Reader plugin in order to enable this support.
DE12315 In VisualRF, when the application window is maximized, the client history playback widget displays.
DE12329 AirWave removes Machine Authentication users created by AOS with no role. Note that Machine
Authentication entries are CACHED entries created by AOS when a machine does a pre-user-auth
machine login to the controller. These users are not created manually or by an external service.
DE12344 In some cases, the snmp_fetcher function can restart multiple times each day, resulting in error
messages and an incorrect client count in AirWave.
DE12340 An issue exists with Aruba Instant in which configurations may be built with invalid IP addresses.
Table 12 Known Issues in AirWave 7.5.0
ID Description
DE8508 Two different users who do not have visibility into each other’s floor plans can potentially create
duplicate floor plans in the same building. The floor plan upload wizard does not check for duplicates in
this scenario.
DE9626 Google Earth fails to launch for Mesh APs when using IE8.
DE10667 VisualRF can stop running without warning if it runs out of memory.
DE10674 A VisualRF restart is required in order to view overlays after importing a controller’s FP backup and
restoring it to VisualRF.
DE10720 Unexpected behavior can occur when specifying a PDF file as the image upload type in VisualRF. The
image may display as blank and/or corrupted. When specifying PDFs, be sure that the PDF was
generated from a source file and not, for example, scanned from a printer. Also, be sure to keep the PDF
file size as small as possible.
Table 9 Known Issues in AirWave 7.5.5 (Continued)
ID Description