User guide

18 AirWave 7.5.6 | Release Notes
DE10741 Some POE devices that are categorized as Universal Network Devices and that have been up for over
248 days may show up as offline in the Daily Device Uptime report. In addition, while viewing the device
directly in AirWave, the device shows the status as OK, though the monitor page will show an ‘out of
range for type integer’ message. Attempting to discover and re-add the device results in a continual
down/awaiting SNMP contact message. A workaround is to reboot the device before rediscovering it.
DE10786 A limitation in Aruba Instant can result in a mismatch when adding the Instant AP using a template
configuration.
DE10791 If you approve a thin AP that already has a roaming client (recently associated to another thin AP), the
result may be that the client is double counted for a single polling period.
DE10875 In VisualRF, APs that appear to be placed at a correct location may still result in a “wrong location” error.
DE10892 A limitation in Aruba Instant causes configuration pushes for some VCs to break when the dynamic-
radius-proxy command is included in the configuration.
DE10902 If a virtual controller is added to AMP, taken offline, reset with factory settings, and then re-added using
the same initial settings, AMPdoes not delete the initial, down VC when creating the duplicate. As a
result, both VCs will display in the APs/Devices > List page. In this case, the initial VC will show a
status of Down, and the APs will migrate to the new VC. A workaround is to select the down device and
then manually delete it in the APs/Devices > Manage page.
DE10907 When a virtual controller (IAP1) with a connected Instant AP (IAP2) is discovered in AMP, placed into a
group folder, and then brought down, AMP sets the down VC’s AMP (IAP2) as the new VC for the
cluster. When the original VC (IAP1) is brought up after a factory reset, AMP discovers this AP as
connected to the new VC (IAP2).
DE10915 When updating VisualRF APs preferences from within a quick view page (APs/Devices > Monitor), a
page refresh is required after changing the settings for Preferences > APs > AP Location and
Preferences > Navigation > % APs Up.
DE10925 In VisualRF, the site list on the bottom of the page disappears after entering/viewing a floor plan and
then refreshing the page in Chrome or Firefox. This behavior does not occur in Internet Explorer.
DE10929 The Clients > Client Detail page currently displays two graphs side-by-side that provide the same
information.
DE10959 AirWave is not able to push a 32-character value for Organization to Aruba Instant virtual controllers.
The commands of Organization configuration sent from AMP to Aruba Instant are quoted strings
because the Organization name may contain blank spaces. Aruba Instant includes the quotes in the
length of the string.
DE10975 In some cases after a server upgrade, ICMP ping may not update on the System > Performance page.
This issue is still under investigation and may be server related as it is not seen in all environments.
DE10977 When attempting to back up all floor plans in VisualRF using Google Chrome, selecting the Network
check box will only enable a backup for all campuses rather than for campuses, buildings, and floors. If
you deselect Network and then select it again, all check boxes will be selected. Note that this issue
does not exist in other supported browsers.
DE11001 When uploading a new floor plan in VisualRF, the screen may remain blank after the upload is complete.
Close the Floor Plan Upload wizard and reload the main page to view the new floor plan.
DE11107 When using IE 8 to launch the VisualRF Image Wizard, the image screen remains blank after the custom
background image is uploaded. Images display properly in other supported browsers.
DE11154 VisualRF may need to be restarted in order to see the mesh view.
DE11163 Errors can occur if you make changes to a device in AirWave, leave the confirmation window/tab open,
and then make additional changes to that device in another tab. Be sure that all changes are confirmed
before opening another tab, or perform all edits within the same tab.
DE11188 The Daily Wireless Network Usage Report may display an error message instead of an empty graph
when no graph points are available.
DE11230 Certificates that are added directly on the certificates page rather than through the Global Aruba
Configuration option do not display in the
VC drop down on the Groups > Basic page.
DE11247 Interfering, non 802.11n objects might not display in VisualRF even when they are shown as Active on
the AP/Devices > Monitor > Radio page.
Table 12 Known Issues in AirWave 7.5.0 (Continued)
ID Description