User's Manual

222 | Performing Daily Administration in AirWave Dell PowerConnect W-AirWave 7.4 | User Guide
the navigation section in Figure 158 in the previous page). The URL of the public portal will be https://
your.AMP.name/public. When you upgrade to the latest version of AirWave, the public portal is disabled by
default, regardless of the type of license.
Figure 159 Public Portal Page Illustration
The Public Portal supports configuration of the iPhone interface. This can be configured using the Master
Console AirWave page. See “Defining General AirWave Server Settings” on page35.
Adding a Managed AMP with the Master Console
Perform the following steps to add a managed AirWave console.
1. Navigate to the Home > Managed AMPs page.
2. Select the pencil icon to edit or reconfigure an existing AirWave console, or select Add New Managed AMP
to create a new AirWave console. The Managed AMP page appears. Complete the settings on this page as
described in Table 124.
3. When finished, select Add to return to the Managed AMPs list page.
Table 124 Managed AMP Fields and Default Values
Field Default Description
Hostname / IP Address N/A Enter the IP address or Hostname of the AirWave server to be managed.
Polling Enabled Yes Enables or disables the Master Console polling of managed AirWave server.
Polling Period 5 minutes Determines how frequently the Master Console polls the managed AirWave server.
Username N/A The username used by the Master Console to login to the managed AirWave server.
The user needs to be an AP/Device Manager or AirWave Administrator.
Password
(Confirm Password)
N/A The password used by the Master Console to login to the managed AMP.
HTTP Timeout
(5-1000 sec)
60 Defines the timeout period used when polling the managed AMP server.
Manage Group
Configuration
No Defines whether the Master Console can manage device groups on the managed
AMP server.