User's Manual
Dell PowerConnect W-AirWave 7.4 | User Guide Creating, Running, and Emailing Reports | 245
Using the New Users Report
The New Users Report lists all new users that have appeared on the network during the time duration defined for
the report. This report covers the user identifier, the associated role when known, device information and more.
The report definition can filter on connection mode (wired, wireless or both).
Figure 176 illustrates the fields and information in the New Users Report.
Figure 176 Reports > Generated > New Users Report Illustration
Using the PCI Compliance Report
AirWave supports PCI requirements in accordance with the Payment Card Industry (PCI) Data Security
Standard (DSS). The PCI Compliance Report displays current PCI configurations and status as enabled on the
network. Verify that AirWave is enabled to monitor compliance with PCI requirements, as described in the
“Enabling or Disabling PCI Auditing” on page66.
In addition to citing simple pass or fail status with regard to each PCI requirement, AirWave introduces very
detailed diagnostic information to recommend the specific action or actions required to achieve Pass status, when
sufficient information is available. Refer to the “Auditing PCI Compliance on the Network” on page65 for
information about enabling PCI on the network. The configurations in that section enable or disable the contents
of the PCI Compliance Report that is viewable on the Reports > Generated page.
Figure 177 illustrates the fields and information in a PCI Compliance Report.
Figure 177 Reports > Generated > PCI Compliance Report Illustration Example