User's Manual

262 | Using VisualRF Dell PowerConnect W-AirWave 7.4 | User Guide
Figure 194 shows additional navigation controls when viewing floor plans. In the bottom left corner of the
window is the Search box. In the top right corner is the zoom control. You can also zoom by using Ctrl + your
mouse wheel as well as the + and - keys. In the bottom right corner are navigation tools related to network,
campus, and building.
Figure 194 On-Screen Navigation Options
Using the Settings in the VisualRF > Setup Page
The VisualRF > Setup page, illustrated in Figure 195, configures advanced settings for VisualRF. Please
reconfigure these settings very carefully because these settings can impact your server's performance as well as
your location accuracy.
Set Origin Set Orientation for proper vertical floor plan alignment.
Add Deployed Device Provision APs onto a floor plan (APs monitored by AMP).
Add Planned Device Manually plan APs onto a floor plan (APs not monitored by AMP).
Delete Planned
Devices/Delete
Deployed Device
Remove all specified devices on a floor plan.
Delete Surveys Remove all surveys (rogue and client) on floor plan.
Table 138 Edit Icons and Descriptions (Continued)
Operation Description
NOTE: Selecting Save will cause VisualRF to restart, disrupting or delaying the usability for up to 5 minutes.