User's Manual

Dell PowerConnect W-AirWave 7.4 | User Guide Configuring AMP | 37
validates the Folder and Group to ensure that both settings have been set to valid dropdown options. Table 9
describes the settings and default values in this section.
3. On the AMP Setup > General page, locate the Top Header section to select the Top Header Stats to be
displayed at the top of the interface. For more detailed information about each option, refer to Table 5 on
page 22.
4. On the AMP Setup > General page, locate the Search Preferences section. Select the search categories to
include in a “Full” search of AMP such APs/devices, clients (connected and/or historical), VPN sessions
(connected and/or historical), rogues, rogue clients, tags, folders, and groups. All are selected by default. Per-
user search preferences can be set in the Home > User Info page; refer to “Customized Search” on page34.
5. On the AMP Setup > General page, locate the Home Overview Preferences section. Table 11 describes the
settings and default values in this section.
6. On the AMP Setup > General page, locate the Display section and select the Group tabs and options to
appear by default in new device groups.
Table 9 AMP Setup > General > Automatic Authorization Fields and Default Values
Setting Default Description
Add New Controllers
and Autonomous
Devices Location
New
Device
List
Globally add new controllers and autonomous devices to:
 The New Devices list (located in APs/Devices > New).
 The same folder and group as the discovering device.
 The same group and folder of their closest IP neighbor on the same subnet.
 Choose a group and folder. If you select this option, enter the folder/group in the
Auto Authorization Group and Auto Authorization Folder fields that display.
NOTE: This setting can be overridden in Groups > Basic.
Add New Thin APs
Location
New
Device
List
Globally add new thin APs to:
 The New Devices list.
 The same folder and group as the discovering device.
 The same group and folder of their closest IP neighbor on the same subnet.
 Choose a group and folder. If you select this option, enter the folder/group in the
Auto Authorization Group and Auto Authorization Folder fields that display.
NOTE: This setting can be overridden in Groups > Basic.
Table 10 AMP Setup > General > Home Overview Preferences Fields and Default Values
Setting Default Description
Configure Channel
Busy Threshold
Yes Whether you want to configure the threshold at which a channel is considered to be
busy at the Top Folders By Radio Channel Usage Overview widget.
Channel Busy
Threshold (%)
10 The threshold percent at which the radio channel is considered busier than normal.
NOTE: Changes to this section apply across all of AirWave. These changes affect all users and all new device groups.