Installation guide

16 Dell PowerConnect W-AP175 Outdoor Access Point | Installation Guide
Wrapping of Butyl Rubber
1. Cut a 3/4” (19 mm) strip of butyl rubber.
2. Wrap the strip of rubber around the taped connector (Figure 9)
3. Join the two ends by pushing them together until there is no longer a seam (Figure 10).
Figure 9 Butyl Rubber Placement
Figure 10 Butyl Rubber Wrap
Cut 3/4” strip
of rubber
Squeeze thinner
& wider
Wrap rubber
around base
of antenna
mount
AP175_13
Wrap rubber
around base
of antenna
mount
Squeeze to
bond rubber
to itself
Rubber will
be wrapped
with 4 layers
of tape
AP175_14