Configuration manual
Table Of Contents
- Executive Summary
- Introduction
- Network Topology
- Applicable Hardware and Software Versions
- MAC Authentication with W-ClearPass and Dell Networking 7024P Switch
- OnGuard posture enforcement with Dell Networking 7024P Switch
- Appendix A
Dell Networking W-
Series ClearPass Configuration Guide
10
Add a RADIUS Server
Navigate to System > Management Security > RADIUS > RADIUS Server Configuration
Click on Add
Input IP address of the ClearPass appliance into RADIUS Server Host Address
Change RADIUS Server Name to an appropriate name
Click Apply
Click on Detail
Choose the IP address from the RADIUS Server Host Address drop down list
Click on the checkbox located in the Secret field. Enter a secret key to be used with the ClearPass
appliance.
Choose Enable from the dropdown list in the Primary Server field
Click on Apply
Save your configuration to the running configuration (disk icon at the upper right of the GUI)