Configuration manual
Table Of Contents
- Executive Summary
- Introduction
- Network Topology
- Applicable Hardware and Software Versions
- MAC Authentication with W-ClearPass and Dell Networking 7024P Switch
- OnGuard posture enforcement with Dell Networking 7024P Switch
- Appendix A
Dell Networking W-
Series ClearPass Configuration Guide
15
Configuring a Network Policy
Navigate to Configuration > Start Here
Choose MAC Authentication
Under the Service tab, input and change the following:
Enter a descriptive name in the Name field
Enter a description in the Description field
Under Service Rules, remove all default conditions by clicking on the trash icon to the
right of each condition
Add a new condition by clicking on Click to add… and choosing the following:
o Type – Radius:IETF
o Name – Calling-Station-Id
o Operator – BELONGS_TO_GROUP
o Value – AllowedMacAddresses (descriptive name from example)
Click on the disk icon next to the condition to save
Click on Next at the bottom right to move to the Authentication tab
Figure 7. MAC Authentication ClearPass – Configuring a Network Policy Service