Deployment Guide

118 | Configuring Basic Network Access Settings
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
All networks that have been provisioned are included in the list. To view details for a network, or to configure a
network, click the network’s row in the list. The row expands to include the Show Details, Edit, Disable or Enable,
and Delete options.
Configuring Basic Network Access Settings
1. To configure the network settings that will be provisioned to devices, click the network’s Edit link. To create a
new network, click the Create new network link in the upper-right corner. The Network Access form opens
with the Access tab displayed.
The configuration process is the same for editing an existing network and for creating a new network. The
Network Access form is divided into several tabs:
l Access – Specifies basic network properties, such as the name of the wireless network and the type of
security that is used. See "Configuring Basic Network Access Settings " on page 118.
l Protocols – Specifies the 802.1X authentication protocols that are used by the network. See "Configuring
802.1X Authentication Network Settings" on page 120.
l Authentication – Specifies the type of device authentication to be used for the network. See "Configuring
Device Authentication Settings" on page 121.
l Trust – Specifies options related to mutual authentication. See "Configuring Mutual Authentication
Settings" on page 122.
l Windows – Specifies networking options used only by devices using the Windows operating system. See
"Configuring Windows-Specific Network Settings" on page 124.
l Proxy – Specifies a proxy server to be used by devices connecting to the network. See "Configuring Proxy
Settings" on page 125.
NOTE: Navigating between different tabs will save the changes you have made. The modified settings are indicated with a “#”
marker in the tab. The settings used for device provisioning are not modified until you click Create Network.