Quick Start Manual

14 Dell Networking W-ClearPass Policy Manager 6.0 | Quick Start Guide
Policy Manager ships with fourteen preconfigured Services. In this Use Case, you select a Service that supports
802.1X wireless requests.
Table 1: 802.1X - Create Service Navigation and Settings
Navigation Settings
Create a new Service:
l Services >
l Add Service (link) >
Name the Service and select a pre-configured
Service Type:
l Service (tab) >
l Type (selector): 802.1X Wireless >
l Name/Description (freeform) >
l Upon completion, click Next (to
Authentication)
The following fields deserve special mention:
n Monitor Mode: Optionally, check here to allow handshakes to occur (for monitoring purposes), but without
enforcement.
n Service Categorization Rule: For purposes of this Use Case, accept the preconfigured Service Categorization
Rules for this Type.
2. Configure Authentication.
Follow the instructions to select [EAP FAST], one of the pre-configured Policy Manager Authentication
Methods, and Active Directory Authentication Source (AD), an external Authentication Source within your
existing enterprise.
NOTE: Policy Manager fetches attributes used for role mapping from the Authorization Sources (that are associated with the
authentication source). In this example, the authentication and authorization source are one and the same.
Table 2: Configure Authentication Navigation and Settings
Navigation Settings
Select an Authentication Method and
an Active Directory server (that you
have already configured in Policy
Manager):
l Authentication (tab) >
l Methods (Select a method from
the drop-down list)
l Add >
l Sources (Select drop-down list):
[Local User Repository] [Local SQL
DB]
[Guest User Repository] [Local SQL
DB]