Tech Note

6. Adding a Network Device (Switch)
To connect with CPPM using the supported protocols, a Network Access Device (NAD) must belong to
the global list of devices in the Policy Manager database.
The switch to be used must be set up as a Network Device in CPPM prior to testing the services.
Navigate to Configuration->Network->Devices. Click Add Device. Enter the profile properties to
reflect the options as displayed below (Note: the RADIUS Shared Secret is “aruba123” which was
configured earlier on the Cisco switch via the command client 192.168.99.10 server-key
aruba123):
Click Add to save this device to the Network Devices list.
ClearPass Policy manager Cisco Switch Setup with CPPM| | 25