User's Manual

2. (Optional) You may enter additional identifying information in the Description field.
3. The options available in the Network Type drop-down list are:
l Both — Wired and Wireless – Configures both wired (Ethernet) and wireless network adapters. Use
this option when you have 802.1X configured for all types of network access.
l Wireless only – Configures only wireless network adapters.
l Wired only – Configures only wired (Ethernet) network adapters.
4. The options available in the Security Type drop-down list are:
l Enterprise (802.1X) – Use this option to setup a network that requires user authentication.
l This option is the only available choice when the Network Type is set to “Wired only”.
l Personal (PSK) – Use this option to setup a network that requires only a pre-shared key (password) to
access the network.
This option is only available when the Network Type is set to “Wireless only”.
5. If you have selected the Personal (PSK) security type, you must provide the pre-shared key in the
Password field. The minimum password length is six characters. Selecting the PSK security type will hide the
Protocols, Authentication, and Trust tabs.
6. In the Wireless Network Settings area:
l The Security Version field lets you set the encryption version for the wireless network to WPA with
TKIP or WPA2 with AES.
l In the Auto Join row, you can mark the Automatically join network check box to specify that the
device should be automatically connected to the network when it is provisioned. If only one network is
available to the user, the device will be connected automatically. If multiple networks are available, the
user will be able to choose the network to connect to. If the Automatically join network option is not
selected on this form, an option to manually connect to the network will be shown to the user.
7. Do one of the following:
l Click Next to continue to the Protocols tab.
l Click Save Changes to make the new network configuration settings take effect.
l Click Cancel to discard your changes and return to the main Onboard configuration user interface.
For information about the list of network settings, see "Network Settings " on page 130. For more information
about configuration profiles, see "Configuration Profiles" on page 165
Dell Networking W-ClearPass Guest 6.4 | User Guide Onboard | 133