User's Manual
142 | Onboard Dell Networking W-ClearPass Guest 6.4 | User Guide
3. In the Magic String field, enter the value to send as the "X-Apple-Config-Magic" header in each EAS HTP
request.
4. To allow the user to move messages out of this email account into another account, select the check box in
the Allow Move field. Leave this field blank to prevent moving messages between accounts, and to prevent
forwarding or replying from other than the message's originating account.
5. To include this email account in recent address syncing, select the check box in the Allow Recent Address
Sync field.
6. To send outgoing mail from this account only from the Mail app, and prevent sending mail in third-party
applications, select the check box in the Use Only in Mail field.
In the Account Settings area:
1. (Required) Choose one of the following options from the Account Details drop-down list:
l User provided — entered by user on device. This option requires the user to enter their credentials
on the device to access their email.
l Identity certificate — created during provisioning. This option uses the device’s TLS client
certificate to authenticate the user. Using this option requires configuration of the ActiveSync server to
authenticate a user based on the client certificate.
l Provisioning — values acquired during device provisioning.
l Shared preset values — testing only. This option provides a fixed set of credentials to the device.
These settings cannot be modified for each user when provisioning a device, so it is recommended that
these settings only be used when testing Exchange integration.
2. In the Domain field, enter the domain for the account.
3. Select the appropriate option n the Email Address field. Options include Let system define, Same as
username, and Generate using username.
4. If "Shared preset values - testing only" was chosen in the Account Details field, this form includes fields for
login credentials. Enter the login information for testing in the User, Password, and Confirm fields. The
minimum password length is six characters. If both the Domain and User fields are blank, the device will
prompt the user.
In the Sync Settings area:
1. Choose one of the following options from the Days of Mail drop-down list:
l No Limit
l 1 day
l 3 days
l 1 week