User's Manual
144 | Onboard Dell Networking W-ClearPass Guest 6.4 | User Guide
6. Click Save Changes. The AirPlay setting is available as a configuration unit on the Configuration Profile
form.
For more information about configuration profiles, see "Configuration Profiles" on page 165
Configuring AirPrint Settings
AirPrint settings you define can be used in configuration profiles for an iOS device. An AirPrint setting includes
its name and description, and AirPrint printer locations that are available to the user. You can define multiple
AirPrint settings.
AirPrint settings are only supported on iOS7 devices; they are ignored by all other devices.
To configure an AirPrint setting:
1. Go to Onboard > Configuration > iOS Settings. Either click an existing AirPrint setting's name in the list;
or click Add New, select AirPrint Settings in the Settings Type drop-down list, and click Create. The
AirPrint Settings form opens.
2. In the Name field, give this AirPrint setting a short name that identifies it clearly. AirPrint setting names can
include spaces.
If you are duplicating an AirPrint setting, the original name has "Copy" appended to it. You may highlight
this name and replace it with a new name.
3. In the Description field, you can briefly describe the characteristics of the AirPrint setting.
4. (Required) In the AirPrint Printers field, specify the Destination IP address and Resource Path of each
AirPrint location that will be available to the user.
5. Click Save Changes. The AirPrint setting is available as a configuration unit on the Configuration Profile
form.
For more information about configuration profiles, see "Configuration Profiles" on page 165