User's Manual

150 | Onboard Dell Networking W-ClearPass Guest 6.4 | User Guide
l Provisioning - values acquired during device provisioning
l Shared preset values - testing only
6. If Shared preset values - testing only is selected in the Account Details drop-down list, the Username
and Password fields are added to the form. Enter the CalDAV username and password for connecting to
the server for incoming mail. The minimum password length is six characters.
In the Outgoing Mail Server Settings area:
1. Enter the hostname or IP address of the server for the outgoing mail in the Outgoing Mail Server field
(for example, smtp.exampleprovider.com).
2. In the Port drop-down list, use the counter to select the server to user for outgoing mail.
3. To enable secure socket layer communication with the server and ensure that communications are
encrypted, mark the check box in the Use SSL row.
4. Choose an authentication method from the drop-down list in the Authentication Type row. Options
include:
l Password
l MD5 Challenge-Response
l NTLM
l HTTP MD5 Digest
l None
5. Choose an option from the Account Details drop-down list to indicate how user account information
should be supplied. Options available in the list include:
l User provided - entered by user on device
l Provisioning - values acquired during device provisioning
l Shared preset values - testing only
6. If Shared preset values - testing only is selected in the Account Details drop-down list, the Username
field is added to the form. Enter the username for connecting to the server for outgoing mail.
7. To use the same password for incoming and outgoing mail, mark the check box in the Outgoing Password
Same as Incoming field.
8. To have the email account support S/MIME, mark the check box in the Use S/MIME row.
9. Click Save Changes. The application set is available as a configuration unit on the Configuration Profile
form.
For more information about configuration profiles, see "Configuration Profiles" on page 165