User's Manual

5. If the passcode will not need restrictions on repeated or sequential characters, you can mark the check box
in the Allow Simple field.
6. If the passcode must include alphabetic characters in addition to numbers, mark the check box in the
Require Alphanumeric field.
7. To disable all push operations while the user is roaming, requiring the user to manually fetch new data, mark
the check box in the Manual Fetching When Roaming field.
8. To limit the number of times the passcode may be entered incorrectly before the device is locked, use the
counter in the Max Failed Attempts field to specify the maximum number of attempts allowed.
9. To limit the time the device is allowed to be idle before it is locked and the user must re-enter the passcode,
use the drop-down list in the Max Inactivity field to select a number of minutes. Options in this list are
Unlimited or 2, 5, 10, or 15 minutes. The user may set a lower number.
10.To specify a maximum duration for the passcode, use the counter in the Max PIN Age field. After the
specified number of days, the device is locked and the user must change their passcode.
11.To require that the passcode include complex characters, use the counter in the Min Complex Chars field
to specify how many complex characters it must contain. Complex, or special, characters are non-
alphanumeric, such as &%$#.
12.To set a maximum time in which the user may unlock the device without re-entering the passcode, use the
drop-down list in the Max Grace Period field to select a number of minutes. The user may set a lower
number.
13.To specify the minimum number of characters the passcode must include, use the counter in the Min
Length field to select the number of characters.
Dell Networking W-ClearPass Guest 6.4 | User Guide Onboard | 153