User's Manual

2. In the Name field, give the VPN configuration a short name that identifies it clearly. VPN configuration
names can include spaces.
If you are duplicating a VPN configuration, the original name has "Copy" appended to it. You may highlight
this name and replace it with a new name.
3. In the Description field, briefly describe the characteristics of the VPN configuration.
4. In the Connection Type drop-down list, choose Dell VIA. The Dell VIA Settings form expands to include
additional options.
5. In the Server field, enter a hostname or IP address of the server the device should connect to.
6. In the IKE Version field, select the version number for the Internet Key Exchange (IKE) protocol:
l v1 - This protocol performs the authentication in two phases.
l v2 - IKEv2 supports a wider variety of authentication mechanisms and it is faster when compared to
IKEv1 method. IKEv2 has only single phase authentication process
7. In the Authentication drop-down list, configure the following authentication types based on the IKE
version you select:
a. If you choose the IKEv1 protocol, you can specify the following authentication types:
n Certificate – The client certificate issued during device provisioning will also be used as the identity
certificate for VPN connections. This option requires configuring your VPN server to allow VIA
authentication using a client certificate.
n Shared Secret / Group Name – An optional group name may be specified. A shared secret (pre-
shared key) is used to establish the VIA connection. Authentication is performed with a username and
password.
Dell Networking W-ClearPass Guest 6.4 | User Guide Onboard | 157