User's Manual

162 | Onboard Dell Networking W-ClearPass Guest 6.4 | User Guide
Web content filter settings are only supported on supervised iOS7 devices; they are ignored by all other
devices.
To configure a Web content filter setting:
1. Go to Onboard > Configuration > iOS Settings. Either click an existing Web content filter setting's name
in the list; or click Add New, select Web Content Filter Settings in the Settings Type drop-down list, and
click Create. The Web Content Filter Settings form opens.
2. In the Name field, give the Web content filter a short name that identifies it clearly. Web content filter
names can include spaces.
If you are duplicating a Web content filter, the original name has "Copy" appended to it. You may highlight
this name and replace it with a new name.
3. In the Description field, briefly describe the characteristics of the Web content filter.
4. To enable automatic filtering, select the check box in the Automatic Filtering field. The Permitted URLs
field is added to the form.
5. If automatic filtering was selected, use the Permitted URLs field to specify URLs that should be accessible
even if they would otherwise be denied by the automatic filter. Each URL must begin with either http:// or
https://. If this field is left blank, all Web sites will be blocked.
6. In the Whitelisted Bookmarks field, enter the URLs to add to the bookmarks in Safari. The user will only
be allowed to visit these sites. The bookmark title and URLare both required. If a folder name is not
entered, the bookmark is added to the default bookmarks list in Safari.
7. In the Blacklisted URLs field, enter the URLs to block. Each URL must begin with either http:// or https://.
All characters of the URLprefix must be an exact match.
8. Click Save Changes. The Web content filter is available as a configuration unit on the Configuration Profile
form.
For more information about configuration profiles, see "Configuration Profiles" on page 165