User's Manual

Editing SMS Delivery of Guest Receipts
The SMS Delivery options available for the receipt page actions allow you to specify the print template to use,
the field containing the visitor’s phone number, and the name of an auto-send field.
These options under Enabled are available to control delivery of SMS receipts:
l Disable sending guest receipts by SMS – SMS receipts are never sent for a guest registration.
l Always auto-send guest receipts by SMS – An SMS receipt is always generated using the selected
options, and will be sent to the visitor’s phone number.
l Auto-send guest receipts by SMS with a special field set – If the Auto-Send Field is set to a non-
empty string or a non-zero value, an SMS receipt will be generated and sent to the visitor’s phone number.
The auto-send field can be used to create an “opt-in” facility for guests. Use a check box for the auto_
send_sms field and add it to the create_user form, or a guest self-registration instance, and SMS messages
will be sent to the specified phone number only if the check box has been selected.
l Display a link enabling a guest receipt via SMS – A link is displayed on the receipt page; if the visitor
clicks this link, an SMS receipt will be generated and sent to the visitor’s phone number. Only one SMS
receipt per guest registration can be sent in this way.
Enabling Downloading Passes
To enable downloading the receipt to the user as a digital pass:
1. Go to Configuration > Pages > Guest Self-Registration. Click the Guest Self-Registration row, then
click its Edit link. The Customize Guest Registration diagram opens.
2. In the Receipt Page area of the diagram, click the Actions link. The Receipt Actions form opens.
3. Scroll down to the Download Pass area of the form.
l If a Pass Certificate is not installed, an error is displayed. For information on digital passes and installing
pass certificates, see "Digital Passes" on page 271.
l If the Pass Certificate is installed, select the appropriate pass template.
Enabling and Editing NAS Login Properties
To enable and edit the properties for automatic NAS login:
1. Go to Configuration > Pages >Guest Self-Registration. Click to expand the Guest Self-Registration
row in the form, then click its Edit link. The Customize Guest Self-Registration diagram opens.
2. In the lower-right corner of the diagram, click the NAS box or the NAS Vendor Settings link. The NAS
Login form opens.
Dell Networking W-ClearPass Guest 6.4 | User Guide Configuration | 253