User's Manual

262 | Configuration Dell Networking W-ClearPass Guest 6.4 | User Guide

Onboard creates a default Web login page that is used to start the device provisioning process.

To create a new Web login page, go to Configuration >Pages >Web Logins and click the Create new Web

Field Description

Name (Required)Enter a name for the page.

Page Name Identifier page name that will appear in the URL -- for example, "/guest/page_name.php".

Description Additional information or comments about the page.

Vendor Settings (Required) Vendor-specific settings for network configuration. This drop-down list includes a

list of Vendors to you can select from, and a list of Other settings:

l Custom Settings—The form includes options for configuring your custom settings.

l Captive portal with ClearPass Web Auth—The form includes the options for

configuring this vendor setting.

l Single Sign-On - SAML Identity Provided—Complete the configuration options for

this vendor setting. An appropriate service must also be created in CPPM using the

ClearPass IDP service template. The external service provider must then be configured

to use the SAML Web login page as the IdP.

l Single Sign-On - Authorize Only—Allows the server to be configured as an IdP, and a

successful, the user is logged in through the normal SAML IdP flow. If the AppAuth

request is not successful, a SAML Failure response is returned to the service provider.

This vendor setting is useful if you have configured Aruba Auto SignOn (ASO) with third-

party identity providers.

l Controller-initiated—Guest browser performs HTTP form submit

l Server-initiated—Change of authorization (RFC 3576) sent to controller—Server-

initiated logins require the user's MAC address to be available. This is usually acquired

through the captive portal redirect.

Table 39: Web Login Editor, General Properties