User's Manual
300 | Configuration Dell Networking W-ClearPass Guest 6.4 | User Guide
Field Description
leave this field blank.
Confirm
Passphrase
SMS Source
Address
Enter the originator address of sent SMS messages. Depending on the provider, this may be
either a phone number or a short string.
Message
Format
If needed for custom SMS handlers, you can select the check box to specify that the message
format should be converted to hex-encoded UTF-16 (Unicode).
The Mobile Number Settings area of the SMSGateway Configuration form includes options for defining the
mobile phone number settings:
Field Description
Country
Code
Default country code to use for mobile telephone numbers that start with the national prefix. Most
SMSproviders require that the number be sent with the country code.
Default
Length
If your country has a default length, enter it here. The country code entered in the previous field will be
automatically added if it is required. For example, North American numbers have a default length of 10,
and country code 1.
Auto
Plus
Length
If your SMS provider requires a "+" for international numbers, enter the minimum length for
international numbers. If a phone number is entered whose length is greater than or equal to this value,
the "+" will automatically be prepended.
For example, North American numbers have a default length of 10 and a country code of 1, so the Auto
Plus Length would be 11.
National
Prefix
If your country uses a national dialing prefix such as "0", you may enter it here. When sending an SMS
to a number that starts with the national dialing prefix, the prefix is removed and replaced with the
country code instead.
Table 58: SMS Gateway Configuration -- Mobile Number Settings Options
The lower part of the SMS Gateway Configuration form includes the Connection Settings, Debug, and Test
SMSSettings areas: