User's Manual

306 | Configuration Dell Networking W-ClearPass Guest 6.4 | User Guide
3. To enable, disable, or delete a carrier, click the carrier in the list. The carrier’s row expands to include the Edit,
Enable or Disable, and Delete options.
l To enable a carrier, click the Enable link in its row, then refresh the screen. The carrier will then be
available to work with and will be included in the drop-down lists when you click the Display Lists link.
4. The procedures for adding and for editing a carrier are the same.
l To add a carrier to the list, click the Create tab above the form. The Mobile Carrier Editor form is added
at the top of the list.
l To edit an existing carrier, click the carrier’s row in the list, then click its Edit link. The row expands to
include the Mobile Carrier Editor form for that carrier.
l When creating or editing a gateway, to include the Mobile Carrier field in the visitor’s registration form,
choose Registration form will have the visitor_carrier field in the Carrier Selection drop-down
list. The Mobile Carrier field is also added to the Test SMS Settings area of the forms.
5. In the Name field, enter the carrier’s name. If there is more than one format of the carrier company’s name,
use the format the public most readily identifies with the carrier service.
6. To include the carrier in the list of choices for users, mark the Enable check box.
7. (Optional) In the Country field, enter the country where the carrier’s service is offered. If appropriate, you
may also indicate an area within the country, such as a city, county, or state.
8. In the SMS Address drop-down list, choose one of the following options:
l Use a template to determine the email address— When this option is chosen, the next field’s
name becomes SMS Template.
l Use a fixed email address—Use this option if all SMS messages are to be sent to the same address.
When this option is chosen, the next field’s name becomes Address.
9. Configure the option you chose in the previous step:
l If you chose Use a template... in the SMS Address field, enter an example email address in the SMS
Template field. This provides the pattern for the address format.