User's Manual

36 | W-ClearPass Guest Manager Dell Networking W-ClearPass Guest 6.4 | User Guide
Filtering the List of Active Sessions
On the Guest >Active Sessions list, you can use the Filter tab to narrow the search parameters and
quickly find all matching sessions:
Enter a username or IP address in the Filter field. Additional fields can be included in the search if the “Include
values when performing a quick search” option was selected for the field within the view. To control this
option, use the Choose Columns command link on the More Options tab.
You may enter a simple substring to match a portion of the username or any other fields that are configured
for search, and you can include the following operators:
Operator Meaning Additional Information
= is equal to You may search for multiple values when using the
equality (=) or inequality !=) operators. To specify multiple
values, list them separated by the pipe character ( | ).
For example, specifying the filter "role_id=2|3, custom_
field=Value" restricts the accounts displayed to those with
role IDs 2 and 3 (Guest and Employee), and with the field
named "custom_field" set to "Value".
!= is not equal to
> is greater than
>= is greater than or equal to
< is less than
<= is less than or equal to
~ matches the regular expression
!~ does not match the regular
expression
Table 7: Operators supported in filters
To restore the default view, click the Clear Filter link.
Click the Apply Filter button to save your changes and update the view, or click the Reset button to
remove the filter and return to the default view.