User's Manual

3. Search results are returned to the portal user, who can then select from one of the matching item, or
continue typing to further narrow the search.
Configuration Summary
To configure LDAP user search for AirGroup, you will:
1. Create a W-ClearPass Guest LDAP server
2. Enable user search for this server
3. Configure the user interface for the airgroup_shared_user field
4. Specify user search options for the user interface
Each of these steps is described in the following sections.
Basic LDAP Server Settings
In W-ClearPass Guest, go to Administration > Operator Logins > Servers and click the Create new LDAP
server link.
In the basic properties and Operator Logins areas of the Edit Authentication Server form:
Field Description
Name Enter a name for the LDAP server.
Server URL Provide the LDAP URL of the server. This would typically be in
the form:
ldap://ldap-server-hostname.example.com/<LDAP Base
DN>
Bind DN If your directory server requires authentication, provide
suitable credentials.
A typical base DN for Microsoft Active Directory might be
DC=example,DC=com.
Bind Password
Enabled Clear the Use this server to authenticate operator
loginscheck box unless you also plan to configure LDAP
operator logins with this server.
Table 91: Edit Authentication Server, Basic Properties
Dell Networking W-ClearPass Guest 6.4 | User Guide Administration | 365