User's Manual

Option Description
resultsCss.max-height =
400px
Specifies that the list of matching items should be up to 400 pixels in height.
Additional CSS properties may be specified
using the “resultsCss” value, if required.
ajax.dataType = sajax Specifies that the field should use a dynamic query mechanism to look up a
search term. This parameter should not be changed.
ajax.url =
NwaAirGroupUserSearchAjax
Specifies that the field should perform a user search. This parameter should not
be changed.
ajax.args.server = … Specifies the name of the LDAP server that should be searched. This parameter
must match the name of the LDAP server that was created, or else the search
operation will fail.
ajax.quietMillis = 500 Specifies that the user search operation should be performed after half a second
(500 ms). This parameter is used to avoid performing searches while the user is
still typing. To increase the responsiveness of the user interface, this parameter
can be reduced, but doing so may increase the number of search operations
performed against the LDAP server.
Additional parameters that may be specified in this field include:
Option Description
width = 460px Specifies the width of the field. A value in pixels may be specified, or another length unit
supported by CSS. This parameter does not need to be specified if the CSS Style field is
already used to specify a width.
maximumInputLength
= <number>
Specifies the maximum number of characters that may be entered.
maximumSelectionSize
= <number>
Specifies the maximum number of items that can be selected. After this number has
been reached, the drop-down list will show a message returned by the
formatSelectionTooBig function.
closeOnSelect = false Specify this option to prevent the drop-down list from closing when a value is selected.
This parameter is not recommended when dynamic search is enabled, as a dynamic list
does not contain all possible items that may be selected.
containerCss.<style-
name> = <style-value>
Specify CSS properties that will be applied to the containing element of the “select2”
control.
dropdownCss.<style-
name> = <style-value>
Specify CSS properties that will be applied to the drop-down list element of the “select2”
control.
Table 96: Additional Parameters, Select2 Options Field
For in-depth technical information about these functions, refer to the Select2 programmer’s documentation at
http://ivaynberg.github.com/select2/. For information on configuring AirGroup for LDAP user search, see
"Configuring LDAP User Search for AirGroup" on page 364.
Select2 Hook Details
The Select2 Hook field may be used to attach certain dynamic behaviors to the “select2” control.
This field must contain the definition of a JavaScript function that takes a single argument. The argument to
this function specifies certain behavioral properties of the control. The function should return the argument,
updated as necessary to specify the behavior that you want.
Dell Networking W-ClearPass Guest 6.4 | User Guide Administration | 369