User's Manual

458 | Operator Logins Dell Networking W-ClearPass Guest 6.4 | User Guide
Advanced Operator Login Options
The following options are available in the Logging drop-down list:
l No logging
l Log only failed operator login attempts
l Log only Web logins
l Log only XMLRPC access
l Log all access
Log messages for operator logins, whether successful or unsuccessful, are shown in the application log.
Automatic Logout
The Logout After option in the Advanced Options section lets you configure an amount of idle time after which
an operator’s session will be ended.
The value for Logout After should be specified in hours. You can use fractional numbers for values less than an
hour; for example, use 0.25 to specify a 15 minute idle timeout.
Operator Profiles
An operator profile determines what actions an operator is permitted to take when using Dell Networking W-
ClearPass Guest.
Some of the settings in an operator profile may be overridden in a specific operator’s account settings. These
customized settings will take precedence over the default values defined in the operator profile.
To define new operator profiles and to make changes to existing operator profiles, go to Administration >
Operator Logins > Profiles. The Operator Profiles page opens with the profiles list displayed.
Creating an Operator Profile
On the Administration > Operator Logins >Operator Profiles page, click the Create a new operator
profile link to create a new operator profile.