User's Manual

464 | Operator Logins Dell Networking W-ClearPass Guest 6.4 | User Guide
Configuring AirGroup Operator Device Limit
By default, an AirGroup operator can create up to five personal devices. To change this default:
1. Go to Administration > Operator Logins > Profiles, then select the AirGroup Operator profile in the
list.
2. Click the Edit link. The Edit Operator Profile form opens.
3. In the Account Limit field, specify an appropriate value. This is the maximum number of personal devices
that an operator with this profile can create.
4. Click Save Changes.
You can create a set of operator profiles and configure each profile with a different account limit. This makes it
easy to assign operator profiles appropriately for small groups, larger groups, or events. To create each profile
in the set, duplicate the built-in AirGroup Operator profile, and update the Account Limit field in the new
profile.
Local Operator Authentication
W-ClearPass Policy Manager profiles and W-ClearPass Guest profiles are different. To create a W-ClearPass
Guest operator login, local users are first defined in W-ClearPass Policy Manager with a role that matches an
operator profile in Guest, then rules are used to map the role to the Guest operator profile.
Creating a New Operator
To create a new operator or administrator for W-ClearPass Guest or AirGroup, some steps are performed in W-
ClearPass Policy Manager (CPPM), and some steps are performed in W-ClearPass Guest, as described below:
1. Create an operator profile in W-ClearPass Guest, or use an existing one. See "Operator Profiles" on page
458.
l To create an AirGroup user, choose either the AirGroup Administrator or AirGroup Operator profile,
as appropriate. These profiles are automatically included in W-ClearPass Guest when the AirGroup
Services plugin is installed.
l MACTrac users are created entirely in CPPM.
2. Create a CPPM role for the operator: In CPPM, go to Configuration > Identity > Roles and create a role
that matches the operator profile. Refer to the W-ClearPass Policy Manager documentation for information
on creating the role.
l When creating AirGroup users or MACTrac users, the appropriate roles are already created in CPPM.
3. Create a local user for the operator: In CPPM, go to Configuration > Identity > Local Users and click Add
User. In the Add Local User form, complete the fields and choose the appropriate role from the Role drop-
down list.
l To create an AirGroup user, choose either the AirGroup Administrator or AirGroup Operator role, as
appropriate.
l To create a MACTrac user, choose the MACTrac Operator role. This form completes MACTrac user
creation; the following steps are not required.